|LT 02/13 CR||Sintering Bell Set, Ø 95 x 50 mm Article No.: 699001186|
The sintering bell with good sealing is perfectly suited to sinter non-ferrous metals under argon. The sintering blanks are placed in the sintering bell and will be sintered under argon. Up to 30 single crowns can be used per sintering cycle. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at a very low argon consumption.Sintering Pearls for Sintering Furnace LT 02/13 CR
The use of sintering pearls which reduce the atmosphere inside the sintering bell ensures perfect results. They prevent the crowns and bridges from sticking or jamming during the sintering process. It must be ensured that the frameworks und single crowns are imbedded in sintering pearls up to their upper edge. Though, it must be ensured that they should not enter the crowns in order not to hinder the sintering shrinkage.Special Tongs for Charging the Sintering Bell
We offer a pair of special tongs for loading and unloading the furnace. The sintering bell can easily be removed from the sintering chamber. Note: The accessories described above are designed for cold charging and discharging. Removing them in hot condition is not permitted.
For charging zirconia workpieces charge saggars are recommended. A saggar basically consists of the sintering dish as base and the spacer ring with ventilation openings. The material is highly resistant to temperature fluctuations and can be used for processes with short heat-up and cool-down times.
When charging the furnace it must be ensured that the lower charge carrier is generally resting on the spacer ring. This provides for air-circulation under this carrier and improves the temperature uniformity. It is recommended to cover upper saggar with another sintering dish as lid.
The starter set consists of a charge saggar, a spacer ring as a base and a second sintering dish as lid. The use of additional saggars (sintering dish and spacer ring) allows charging on additional levels. Both furnace models are designed to get charged with up to three charge saggars.
Number of required charge levels in overview:
- 1 level: Starter set which includes 2 sintering dishes and 2 spacer rings
- 2 levels: Starter set + 1 sintering dish + 1 spacer ring
- 3 levels: Starter set + 2 sintering dishes + 2 spacer rings
|Starter-Set, Ø 115 mm Article No.: 699001066||Sintering Dish, Ø 115 mm Article No.: 699001054||Spacer Ring with Ventilation Openings Article No.: 699001055|
Placing the zirconia product in charge saggars provides for optimum utilization of the furnace chamber. Up to three saggars can be stacked in the furnaces. The integrated air slots ensure a better air circulation of the charge. The upper saggar can be closed with a separate ceramic lid.
|Safe charging on up to three levels||Charge Saggar, 110 x 75 x 30 mm Article No.: 699000279||Lid for Charge Saggar Article No.: 699000985|
|Model||Heating elements||Support tubes||Thermocouple||Spring lift door||Bottom plate|
|Article No.||Image||Article No.||Article No.||Article No.||Article No.|
|LHT 01/17 D||4 x 692253380||-||540300384||2 x 691400598||601604420|
|LHT 03/17 D||4 x 692252721||-||540300554||2 x 691400599||-|
|HTCT 01/16||4 x 602212884||-||540300384||2 x 691400598||601604420|
|LHT 02/17 LB Speed||4 x 692252721||-||540300554||-||-|
|LT 02/13 CR||2 x 692253400||12 x 692040251||540300257||2 x 691400598||-|
* Note: If other controller types are used an adapter cable for connection to mains supply has to be ordered separately. The device will be activated by plugging in the socket.
|For models||Ceramic ribbed plate||Ceramic collecting pan||Steel collecting pan (Material 1.4828)|
|Articel No.||Dimensions in mm||Articel No.||Dimensions in mm||Articel No.||Dimensions in mm|
|L 1, LE 1||691601835||110 x 90 x 12,7||-||-||691404623||85 x 100 x 20|
|LE 2||691601097||170 x 110 x 12,7||691601099||100 x 160 x 10||691402096||110 x 170 x 20|
|L 3, LT 3||691600507||150 x 140 x 12,7||691600510||150 x 140 x 20||691400145||150 x 140 x 20|
|LE 6, L 5, LT 5||691600508||190 x 170 x 12,7||691600511||190 x 170 x 20||691400146||190 x 170 x 20|
|L 9, LT 9, N 7||691600509||240 x 220 x 12,7||691600512||240 x 220 x 20||691400147||240 x 220 x 20|
|LE 14||691601098||210 x 290 x 12,7||-||-||691402097||210 x 290 x 20|
|L 15, LT 15, N 11||691600506||340 x 220 x 12,7||-||-||691400149||230 x 330 x 20|