Лабораторные плавильные печи SC 8 с обогревом с помощью стержневых нагревателей из карбида кремния
|Laboratory melting furnace SC 8 with SiC rod heating for use with a customer crucible|
The laboratory melting furnace SC 8 was specially developed for melting glass in the laboratory. A customer crucible is entered into the furnace from the top. Glass is molten in the crucible. Heating is realized from two sides with powerful SiC rods. With this heating method a maximum furnace temperature of 1500 °C can be achieved. The very effective, multi-layer insulation with long-life lightweight refractory bricks inside the chamber guarantees low outside temperatures even if the furnace is in continuously used.
|Model||Tmax||Inner dimensions in mm||Volume||Outer dimensions in mm||Heating power||Electrical||Weight|
|°C||w||d||h||in l||W||D||H||in kW1||connection*||in kg|
|1Depending on furnace design connected load might be higher *Please see page 73 for more information about supply voltage|